Hello Brach,
I got the pedal working. I hadn’t bridged the jumpers (facepalm). However, I’m only getting the high side of the pedal. I am troubleshooting the low right now. This is what I assume is happening I should say. I don’t hear the harmonic trem sound from the unit, just normal trem. Turning the harmonic mix knob down gives me a straight signal. Let me know if I am mistaken here. Anyways, The optocoupler led’s are working fine; vr9 responds when adjusting the gain and checking resistance at r7 and +pad of optocoupler. I am unable to get a voltage reading for r7 due to my multimeter being “smart” and deciding to give me ohm readings. Same with the optocoupler. I’ll pick up a better multimeter tomorrow and check everything. I don’t see any visible bridges anywhere but will give it a more thorough check tomorrow as well.