Hi Brach, thanks for responding.
So after the initial testing, I set the amp aside and went on to complete the cabinet. It’s been 10 days. I plugged everything in…
nothing! No sound. No static. Nothing.
Today, I disassembled it and started testing voltages again. As before, I get about 122 V ac coming in. TP 1, which measured 175V before is now reading 193V. TP2 which originally measured 7.08v is now 7.43V. At TP4 which originally measured 163V is now 0v at both ends.
How should I proceed to troubleshoot?
I’m pretty handy with a soldering iron but I have only basic understanding of electronics.
Thanks again.
Alex