Main thing we need to figure out is if the microcontroller is receiving 5V from the power supply.
The red points on the voltage chart are showing all the points that should measure 5V from ground. Theoretically all the red points should be connected together and showing continuity to each other because they are all on the same voltage rail, but that’s not what we are testing.
Please test the red point on the microcontroller to see if it is getting 5V. If it is, then check to make sure R12 is soldered properly and is the correct value of resistance. If not, check the other red points to see if anything is receiving 5V.
Let me know.
-Brach