For flux remover…I make my own my mixing rubbing alcohol and acetone in a 1:1 ratio. It works pretty well. You can use a toothbrush or Q-tip to clean the flux off the board with it.
For most of the steps in the troubleshooting guide the pedal just needs to be powered on. Some steps will direct you to press the bypass switch.
I don’t know what you are asking with your last question. Just attach the wires to the proper places…which it looks like you’ve already done, except for the wire that fell off.
The main thing I still need to know is what step you get stuck on in the troubleshooting manual.