It has been a while since my last post.
Again, I’m having trouble with the pedal working. It is fine in BYPASS. However, whether the pedal will work when turned on is always a crap shoot. The LEDs light up. I’ve checked all solder joints, made sure that pots are not touching the pcb (I’ve put rubber between them.) Some times it starts to work if I unplug the power and power back up. Sometimes it doesn’t.
One time I turned it on, the bypass and On were backward. Tremelo when bypassed; no trem when “on.” Only once, however; couldn’t replicate.
Very frustrating. When it works, it is wonderful, but I’ve been fighting this pedal since March.
Any help is appreciated.
tx,
j