Ok cool, definitely stoked to try this out when I get home tonight! Not being familiar with the way the Quav utilizes the ATMega micro (I have messed around w/ Arduino before tho), I’m running out of other hardware to check and recheck.
Thanks again for such a detailed response Brach!
For my own curiosity:
I read thru the MIDI-mod manual. So when (re)setting the presets, you’re basically setting each preset to whatever the pots are set to when performing each preset write? We just need to have real/valid values in the registers? Are these presets used for anything if not running the MIDI mod?
When sweeping all pots full clockwise, then counter-clockwise, the the micro looking for anything particular under these conditions or doing anything w/ that information? i.e. IF [all VR inputs 0V] do this, IF [all pots 5V] do that).
Thanks again,
Andrew