Thanks,
In calibration mode, I was able to even out the response of the hi/lo filters. When I first engaged calibration mode, the lo side was almost inaudible. After about 20 half turns of the lo adjuster, it was about equal level with the hi side. With the gain trim pot was set at 40K, the volume was good, but the muffled tone was still an issue. I tried adjusting the tone pots and the gain pot up and down to varying degrees to get a good balance, but there was no setting where the muffled tone totally disappeared.
The tone isn’t bad, it’s just not the tone I was expecting. I’d really like the tone to have clarity similar to that of the bypassed tone, but with tremolo. Is that what I should be expecting from this pedal? Are my expectations unobtainable?
BTW, my test rig is 2 P90s into a tweed Champ. I get the most muffled and compressed tone when I play through the neck pickup by itself. Not sure if that helps.
Thanks,
Peter